First Start-Up; Cleaning And Maintenance - Bartscher GWTH1 Original-Gebrauchsanleitung

5.2.2 First start-up

Cooking station knob
Switching the gas wok cooker on / off
Switching the burner on
-
a. Open the gas shut-off valve to start the gas supply.
b.
Rotate the knob to the ignition position
then ignite the flame with the lighter. Hold the knob pressed until the flame is
stable, then release it and set the desired flame size
- Switching the burner off
a. In order to put out the flame rotate all knobs to off position (●).
b. Close the gas shut-off valve.

6. Cleaning and maintenance

CAUTION!
The device is not designed for direct washing with the water jet.
Do not use water stream for cleaning!
Cleaning
o Clean the device periodically in order to keep it ready for work and prolong its
life span.
o Perform the regular cleaning as listed below and follow the warning information :
o Make sure that the gas shut-off valve is closed and the knobs of the cooking
stations are in off positions (●).
o Wait for the unit to cool.
- 46 -
Fig. 10
, press and hold it,
(large) or (small).