Led Ring Displays - Silvercrest SLIM SSMS 1350 B2 Bedienungsanleitung

6.

LED ring displays

The 3 LED rings 17/18/19 on the buttons at the front of the device indicate different op-
erating modes or programming steps. The following table shows the respective meaning.
Please note that the LED rings can display 3 different states:
- permanently lit
- regularly flashing
- rhythmic flashing (flash 3 times - pause - flash 3 times - etc.)
LED ring displays
17
All LED rings light up one after the other.
regularly flashing
permanently lit
flashes
— flashes
—
—
—
—
All LED rings flash twice in turn, one after
the other.
rhythmically flashing
All LED rings are permanently lit
All LED rings flash rhythmically
68 GB
18 19
—
—
— —
—
— flashes
permanent-
—
ly lit
— flashes
— flashes
—
Meaning
The device carries out a self-diagnosis after it is
switched on.
The device is heating up to prepare espresso.
The device is ready to prepare espresso.
A single espresso is being prepared.
Dial 4 opened: hot water production
A double espresso is being prepared.
Device preheats for steam production.
The device is ready for steam production.
Dial 4 opened: steam production
during the descaling process
The settings menu is activated.
Turn the dial 4 all the way to OFF.
The device must cool down (e.g. after steam pro-
duction)
when the steam function is activated: the device
has automatically switched to cooling mode.
Press the button
steam function.
The device needs to be descaled.
Error message for the heating element.
Contact the Service Centre.
19 again to reactivate the