Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
•
Use personal protective equipment. Refer to
Personal protective equipment on page 25 .
•
Overexposure to vibration can cause circulatory
damage or nerve damage to persons with decreased
blood circulation. Get medical aid if you have
symptoms of overexposure to vibration. These
symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes
in skin color or condition. These symptoms usually
show in the fingers, hands or wrists.
•
Do not operate the product without all protective
covers installed.
•
Make sure that you know how to stop the motor
quickly in an emergency.
•
Before you go away from the product, stop the motor
and disconnect the power cord. Make sure that there
is no risk of accidental start.
•
Make sure that clothing, long hair and jewelry do not
get caught in moving parts
•
Make sure that you are in a safe and stable position
during operation.
•
Only operate the product on horizontal surfaces.
•
Do not operate the product unless you can get aid if
an accident occurs
•
Always use approved accessories. Speak to your
Husqvarna dealer for more information.
•
If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Examine the product for damages.
Repair damages or let an approved service agent
do the repair.
•
Only start the product with the brush strip attached.
The brush strip must seal tightly to the surface,
especially during dry surface operations.
•
Make sure that the brush strip is clean and not
damaged. Replace a damaged brush strip.
•
Connect the product to a dust extractor for removal
of the dust.
•
Do not pull the hose of the dust extractor. The
product can fall and cause injury or damage.
•
Keep the dust extractor on until the motor stops fully.
•
Only operate the product from behind with your
hands on the handlebar.
•
Make sure that there is no grease or oil on the
handles.
•
Always keep the 2 wheels on the ground during
operation.
1823 - 003 - 13.04.2022
Read the warning
Dust safety
WARNING:
instructions that follow before you use the
product.
•
Operation of the product can cause dust in the
air. Dust can cause serious injury and permanent
health problems. Silica dust is regulated as harmful
by several authorities. These are examples of such
health problems:
•
The fatal lung diseases chronic bronchitis,
silicosis and pulmonary fibrosis
•
Cancer
•
Birth defects
•
Skin inflammation
•
Use correct equipment to decrease the quantity of
dust and fumes in the air and to decrease dust on
work equipment, surfaces, clothing and body parts.
Examples of controls are dust collection systems
and water sprays to bind dust. Decrease dust at
the source where possible. Make sure that the
equipment is correctly installed and used and that
regular maintenance is done.
•
Use approved respiratory protection. Make sure
that the respiratory protection is applicable for the
dangerous materials in the work area.
•
Make sure that the airflow is sufficient in the work
area.
•
If it is possible, point the exhaust of the product
where it cannot cause dust to go into the air.
Noise safety
WARNING:
instructions that follow before you use the
product.
•
High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
•
To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
•
Use approved hearing protection while you operate
the product.
•
Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Read the warning
Read the warning
Read the warning
25
Werbung
Inhaltsverzeichnis
Fehlerbehebung
