Ravelli R 1000 Pro Bedienungs- Und Wartungshandbuch Seite 152

Menu COMFORT CLIMA
To modify the settings use keys 1 and 2 and by pressing OK you confirm the data and go on to the following one.
By last confirmation with OK you save all settings and return automatically to the screen with the icons.
The activation of this function enables the stove to reduce pellet consumption by activating the modulation phases, after the desired
temperature has been reached. Subsequently, the stove checks that the temperature is maintained steady for a preset time (DELAY
COMFORT CLIMA). If this condition is met, it automatically switches off, and on display appears the writing ECO STOP.
The stove turns on again when the temperature drops below the set threshold (COMFORT CLIMA).
Below are given the steps for accessing the relative menu.
⚠
The operation of the stove in COMFORT CLIMA mode can start the ignition and shutdown phase several times during the
day; this can compromise the duration of the resistance for automatic stove ignition.
��
Using this mode, it is necessary to make sure that after each automatic switch-off, the fire pot always remains perfectly
clean in order to guarantee correct automatic ignition. The COMFORT CLIMA mode also works with an external thermostat
connected.
Use and maintenance manual R 1000 Pro
Example
To activate the function, set the COMFORT CLIMA value different from OFF using buttons
1 and 2. Confirm with OK.
Set the time in which the stove must remain in MODULATION, before switching to ECO
STOP (default 4 ').
The set value (in this case 5 ° C) activated the Comfort Clima function.
OPERATION:
The value adjusts the re-ignition temperature of the stove.
EXAMPLE:
•
room temperature set at 21 ° C
•
Comfort Clima value set at 5 ° C
With this adjustment, the stove will switch off when it reaches 21 ° C and will switch on
again when the room temperature is 15 ° C (21 ° C - 5 - 0.5 tolerance = about 15 ° C). The
strings shown in the screens on the left will appear in sequence on the display.
The modulation phase is activated, as the room set temperature has been reached. If
the temperature is maintained for the set "DELAY COMFORT CLIMA" time, the stove
switches off.
Once the swich-off phase is complete, the display will show ECO STOP. The stove will
remain in this state until the temperature drops to 15 ° C, only then will the ignition phase
be restarted.
EN
Rev.1 29/07/2021
Pag.43