Mother/Child Function; Beep; Bluetooth - ADE M322600 Gebrauchsanweisung

7.5

Mother/child function

Switch on the scale with no load. Wait for "0.00 kg" and the symbol >0< to appear on the scale
display.
Press the M/C key. The M/C symbol will appear on the display. Stand as firm as possible on the
scale. The scale will save the weight reading and display "0.00 kg". In addition, the symbol Net will
appear. When unloading the scale, the net weight displayed will be negative.Now take a child by
the hand and have them step on the weighing surface again. The weight will be automatically
stabilised and the child's weight will be displayed. When unloading the scale, the blinking weight
reading with the symbol Hold will still be displayed. Press the Tare key again to exit the tare
function.
7.6

Beep

NOTE: The beep tone is deactivated by default. If desired, you can activate the function.
Please ask for the extended instructions.
If activated, a beep sounds when ...
... the scale is overloaded.
... the scale is underloaded.
... a key is pressed.
7.7

Bluetooth

NOTE: The (optional) Bluetooth module is disabled at the factory.
Information on activating and setting up the Bluetooth interface as well as pairing
with other devices will only be announced once Bluetooth devices approved by
ADE are available.
M322600-210429-Rev004-UM-en Page 27 of 108