How It Works; Using The Scale; Starting The Scale; Switching Off The Scale - ADE M322600 Gebrauchsanweisung

The mechanical forces acting on the scales are transformed into measurable and evaluable
electrical signals by load cells. The weighing result is displayed continuously.
7.1

Starting the scale

7.1.1 Main switch
The main switch at the bottom of the scale must be switched on. The switch serves only as
transport protection for the scale.
7.1.2 Per key
To switch on the scale, briefly press the ON/OFF key.
After a brief functional test, the scale will show "0.00 kg" and the symbol >0<.
The scale is now ready for use.
The scale will start automatically with the last function used. When used for the first time, the scale
will start automatically with the hold function.
7.1.3 Tap to start
Briefly load the weighing surface of the scale by briefly "tapping" it with your foot. If done correctly, a
short functional test will follow, at the end of which the scale will show "0.00 kg" and the symbol >0<.
The scale is ready for use.
7.2

Switching off the scale

7.2.1 Automatic switch off
The scale will switch off automatically after 90 seconds in battery mode and after 7 minutes in
mains operation.
7.2.2 Per key
To switch off the scale, press and hold down the ON/OFF key for about 2 seconds.
The scale will automatically save the last function used.
7.3

Correct weighing

Switch on the scale with no load. Wait for "0.00 kg" and the symbol >0< to appear on the scale
display.
Stand as firm as possible on the weighing surface. The weight can be read off directly after
standstill.
7.4

Turning function

To turn the display indication, briefly press the ON/OFF key (<1 second).
Page 26 of 108

How it works

7. Using the scale

M322600-210429-Rev004-UM-en