Operation; Weighing; Resetting The Scale To Zero; Using The Tare Function (Tare) - ADE PW 501 Bedienungsanleitung

OPERATION

WEIGHING

1. Place the scale on an even, firm and dry surface. Carefully position the scale in order to
avoid hard shocks to the sensors/feet and therefore any damage.
2. Press to turn on the scale.
3. Wait a moment for "0" to appear on the display.
4. If you want to weigh an item or substance in a container, now place the container
without anything in it onto the weighing surface. Otherwise, proceed as described in
Section 6.
5. Press .
"0" will be displayed.
6. Put the item or substance to be weighed into the container or place it onto the
weighing surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the container
or the weighing surface.

RESETTING THE SCALE TO ZERO

If the display still shows a minus value (symbol ) even though the weighing surface is
empty (for example, if the scale is not optimally positioned or a TARE value is still
displayed; see next section), you must reset the scale to zero.
− Press the
button once.

USING THE TARE FUNCTION (TARE)

This function is practical when baking, for example, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press in order to set the scales back to "0".
2. Add the new item or substance.
The weight of the added item or substance is shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

SWITCHING OFF THE SCALE

− Press
to turn off the scale.
The scale will automatically switch off if it is not used for approx. 2 minutes.
PW501-190705-Rev001-UM-en
19