Weighing; Easy Weighing; Mother-Child Function; Resetting The Scale - ADE M316600 Bedienungsanleitung

Weighing

Weighing

Easy weighing

WARNING against injuries
− Do not step onto the scale with wet feet or when its surface is damp.
Risk of slipping!
− Position yourself on the scale. Stand still and do not hold on to anything.
Shortly afterwards, the measured weight is displayed flashing.
You can now step off the scale. The result is displayed for a few seconds (auto-hold
function).
After a few seconds the scales will deactivate automatically.

Mother-child function

This function is intended for weighing infants and very young children.
Note the display: The symbols shown always indicate what to do next
when weighing.
1. Switch on the scale by stepping on the weighing surface with a little force.
2. Press and hold the UNIT button until a person symbol is displayed at the bottom
left.
3. Step on the weighing surface and weigh yourself. The result is displayed.
4. Now hold your child in your arms and weigh yourself together.
After a short time, the child's weight is displayed, then yours again. After a few
display cycles, in which both measurement results are displayed alternately, the
scale switches off automatically.
To switch off the mother-child function:
1. Switch on the scale by stepping on the weighing surface with a little force.
2. Press and hold the UNIT button until the person symbol disappears from the
display.

Resetting the scale

Reset the scale to its default settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
18
M316600 electronic Flat scale