Technical Description; Installation - Dometic SKYSOL TRACK SMALL Montage- Und Bedienungsanleitung

Skysol Track Small
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
6

Technical description

The blind is available in two operating types:
• Manual
• Powered
I
NOTE
After delivery, the blind type and the scope of delivery should be checked
according to the order confirmation. The number on the data plate indicating
the blind type is located on the back of the head rail.
7

Installation

!
WARNING!
Powered blinds: Disconnect the power supply before you begin and ensure
that it can not be reconnected until installation has been completed.
The blind can be fitted in a recess or to the wall or ceiling.There are different head
rails for powered blinds and manual blinds.
Depending on the space in the installation location, the sequence of installing
the blind components may vary (e.g. to fit the head rail before the side tracks).
EN
Technical description
7