Technical Description; Installation; Installing The Brackets - Dometic Oceanair Skyvenetian Manual Montage- Und Bedienungsanleitung

Skyvenetian Manual/Powered
5

Technical description

The blind is available in different operating types:
• Manual, free-hanging (FH)
• Manual, guide wire (GW)
• Manual, side track (ST)
• Powered, free-hanging (FH)
• Powered, guide wire (GW)
• Powered, side track (ST)
Guide wire models require a fixation of the cords at the opposite side of the head rail
with a hold down option.
I
NOTE
After delivery, the blind type and the scope of delivery should be
checked according to the order confirmation. The number on the data
plate indicating the blind type is located on the back of the head rail.
6

Installation

6.1

Installing the brackets

!
WARNING!
• To avoid strangulation and entanglement, install the head rail in a dis-
tance of at least 1.5 m from the floor in order to keep it out of the
reach of young children.
• Only for manual blinds: Install the operating elements as close to
the head rail as possible and at least 1.5 m from the floor.
• Only for powered blinds: Disconnect the power supply before
you begin and ensure that it can not be reconnected until installation
has been completed.
I
NOTE
Ensure enough room in front of the brackets to be able to access the
release clip.
EN
Technical description
9