Dometic SKYSOL TRACK SMALL Montage- Und Bedienungsanleitung Seite 15

Skysol Track Small
The following notes must be observed when connecting the blinds:
• Ensure cables are not damaged during installation. Routings of cables
through walls or bulkheads must be protected and insulated by appropriate
bushing, grommets or cable conduits.
• Ensure that a 12 V or 24 V stabilized power supply line is available for the
drive at the point of installation. The power supply line is suitably arranged
and protected.
• Secure all cables to prevent any contact with moving parts.
• Only use power supply units and control elements recommended by the
manufacturer to prevent damage or faults during operation caused by incom-
patible electrical components.
• Control devices (e.g. switches) must be installed in visible locations.
➤ Connect the motor as shown in the wiring diagrams.
Dometic Radio Controlled Blind External Receiver
1
12 V/24 V DC
Dometic 9 Chn, 433 MHz Transmitter
Dometic Radio Controlled Blind Internal Receiver
1
12 V/24 V DC
Dometic 9 Chn, 433 MHz Transmitter
EN
bk k
Dometic Radio Receiver
12 V/24 V DC
4
rd
wh
HEADRAIL
bk/wh
2
Atlantic 24S - Double End
3
HD TM24
Atlantic 12S - Double End
bk/wh
HEADRAIL
wh
2
Atlantic 24S - Double End
3
HD TM24
Atlantic 12S - Double End
Installation
24 V DC
24 V DC
12 V DC
24 V DC
24 V DC
12 V DC
15