Technical Description; Installation - Dometic Oceanair Montage- Und Bedienungsanleitung

Rollerblind Chain
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
5

Technical description

The blinds are available in three mounting types in different sizes:
• BR: Bracket mounted (available in sizes BR38 and BR46)
• MP: Mounting profile mounted (available in sizes MP38 and MP46)
• CA: Cassette mounted (available in sizes C1, C2 and C3)
There are different types of fabric restraints:
• FH: Free hanging
• GW: Guide wired (available as Dome (A), Flush Mount (B) and Extended (C), see
GW versions in fig. 1)
The number on the product label indicating the blind type is located:
• For BR versions on the tube under the fabric
• For MP versions on the back of the mounting profile
• For CA versions on the back of the cassette
6

Installation

A
NOTICE! Risk of damage
Consider using two people to install the product if the blind is large or
the installation location is difficult to reach alone.
EN
Technical description
7