Important Warning - Foppapedretti ECE R44-04 Bedienungsanleitung

IMPORTANT WARNING

1. This is a "Universal" baby retaining device, approved in accordance with
Regulation N. 44, amendment series 04. It is suitable for general use in vehicles
and is compatible with most, but not all, car seats.
2. It is easier to check for perfect compatibility if the car manufacturer declares in
the car manual that the vehicle is designed for the installation of "Universal" child
retaining devices for the age range in question.
3. This child retaining device has been classified as "Universal" according to the
stricter standard approval criteria compared with previous models that are not
provided with this notice.
4. It is only suitable for use in vehicles equipped with 3-point safety belts, whether
static or retracting, that are standard approved in accordance with Regulation
UN/ECE N. 16 or other equivalent standards.
5. In case of doubt, contact the manufacturer of the child retaining device or the
retailer.
INSTRUCTIONS FOR USE
CLASSIC CARRYCOT KIT is a component that enables purpose-designed carrycots (read
the carrycot manual to check that it has been designed for this type of installation)
to be secured and used inside the car to transport baby correctly during the
first months of life.
The product has been standard approved according to European Regulation ECE
R44/04 in "Group 0", for transporting babies from 0 to 10 Kg. in weight, corresponding
approximately up to 6 months of age.
The carrycot can be secured in the car, once it has been fitted with the CLASSIC
CARRYCOT KIT.
CAR SEAT REQUIREMENTS
The car seat on which the carrycot is to be positioned must comply with the following
requirements:
• it must be forward facing (Fig. 1);
• it must be a rear car seat provided with at least two passenger seatbelts with 3
securing points (Fig. 2), standard approved according to UNI/ECE Regulation 16,
or an alternative regulation.
ASSEMBLY OF THE Classic carrycot KIT
Follow the fitting instructions given below carefully before placing and using the
carrycot in the car.
Attaching the 3-point seat belt
The 3-point seat belt must be attached to the bottom of the carrycot.
Insert the chest protector on each chest belt and position it to cover the adjustment
device. Insert the crotch protection on the leg separator belt as shown (fig. 3).
18