Start-up
compartment (B) of the light sensor to activate
the device. Pairing mode remains activated for 3
minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 5).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
•
Please wait until teach-in is completed.
If teaching-in was successful, the device LED (C)
•
lights up green. The device is now ready for use.
If the device LED (C) lights up red, please try
again.
•
Please select in the app, in which application (e.g.
light and/or climate control) you would like to
use the device.
•
Allocate the device to a room and give the device
a name.
32