Finish Operation; Maintenance And Care - Kärcher GP 40 Handbuch

Operation
Insert the plug into the socket.
Illustration
Tip: Raise the suction hose by approx.
1m to reduce the suction period
Switch on the unit with the ON/OFF
switch (position 1).
Wait till the pump sucks in and trans-
ports water uniformly
Caution
The water in the pump heats up if there is
no water supply or the pressure side is
closed and can cause injury if it flows out!
The pump may be operated for maximum 3
minutes in this operating status.

Finish operation

Rinse the pump after every use if you
use to transport water with additives.
Disconnect the main plug from the sock-
et.

Maintenance and Care

Maintenance
The appliance is maintenance-free.
Storage
Empty water in the pump using the drain
screw (item 5).
Store the appliance in a frost free area.
12
English
CE declaration
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product: Pump
Type: 1.645-xxx
Relevant EU Directives
98/37/EC
2006/95/EC
89/336/EEC (+91/263/EEC, 92/31/EEC,
93/68/EEC)
2000/14/EC
Applied harmonized standards
EN 55014–1: 2000 + A1: 2001 + A2: 2002
EN 55014–2: 1997 + A1: 2001
EN 60335–1
EN 60335–2–41
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 1995 + A1: 2001
Applied conformity evaluation method
Appendix V
Sound power level dB(A)
Measured: 82
Guaranteed: 84
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212