Pkm IN4-S Bedienungsanleitung Seite 96

4. Set the desired power level of the selected cooking zone
using the sliding sensor.
5. Touch the « T
IMER
flashes and the time value «
30
value « » corresponds to a countdown time (cooking
time) of 30 minutes and is preset at the factory. You can
also set the countdown time (cooking time) individually
(e.g., 65 minutes). Proceed as follows.
a. The time value «
Within these 3 seconds you can set the desired time
value using the sliding sensor (in this example: 6). After
the 3 seconds have elapsed, this time value is saved.
b. Then the time value «
you can set the desired second time value using the
sliding sensor (in this example: 5). After the 3 seconds
have elapsed, this time value is saved.
6. When you have finished the setting, the countdown of the
set time starts. The indicator of the timer flashes for 10
seconds and indicates the remaining time (cooking time /
in minutes).
7. A red dot next to the power level indicator goes on and
indicates that the timer has been activated for this cooking
zone.
8. When the set countdown time (cooking time) has elapsed,
the relevant cooking zone is switched off automatically.
If you want to change the set countdown time (cooking time) after programming,
you must start at step 1 again.
» - . The indicator of the timer
SENSOR
30
» is displayed. The time
3
» flashes for 3 seconds first.
0
» flashes for 3 seconds. Now
~
96
~