Troubleshooting - Pkm IN4-S Bedienungsanleitung

S
TRATEGY
1. Disconnect the appliance from the
mains (fuse-box).
2. Take away the contamination.
3. Wipe the sensors with a damp
sponge or cloth.
4. Dry the sensors with kitchen paper.
5. Connect the appliance to the mains
again.
NOTICE! Do not use any abrasive detergents! Do not use any organic
20
detergents! Do not use essential oils!

8. Troubleshooting

The instructions regarding troubleshooting apply to both models (IN4-S and
IN4-2FZS).
DANGER! Never try to repair the appliance yourself. Repairs carried
out by unauthorised persons can cause serious damage. If the appliance
does not operate properly, please contact the aftersales service or the
shop you purchased the appliance at.
1. Switch off the entire appliance.
2. Disconnect the appliance from the mains (fuse box of your household power
supply).
3. Contact the aftersales service.
➢ Check the schedule below before you contact the aftersales service.
20
Detergents such as vinegar, citric acid etc.
Depending on model: s. page « S
21
K
IND OF CONTAMINATION
C
ONTAMINATION OF THE CONTROL PANEL
E
MERGENCY MEASURES
ERVICE INFORMATION
S
AFETY GUIDELINES
The appliance may beep and
automatically turn off.
The sensors may not work properly
when they are wet.
Dry the control panel carefully
before you put it into operation
again.
21
» at the end of this instruction manual.
~ ~
104
.