Pkm IN4-S Bedienungsanleitung Seite 85

1. Touch the « O
display « ».
2. Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as
the cooking zone clean and dry.
3. Select a cooking zone using the sensors for the
SELECTION OF THE COOKING ZONES
zone 1.
4. The indicator next to the sensor flashes. The
selected cooking zone is activated.
5. Set the desired power level of the selected cooking
zone using the
power level in two different ways:
a) Set the power level of the selected cooking zone
using the
SLIDING SENSOR
sliding sensor using your fingertip.
b) Set the power level of the selected cooking zone
by touching the
6. The selected power level is displayed next to the
cooking zone indicator: e.g., «
H
OW TO START A COOKING PROCESS
/ O » -
N FF SENSOR
. You can adjust the
SLIDING SENSOR
itself: slide over the
SLIDING SENSOR
5
».
. All indicators
: e.g., cooking
at any point.
~ ~
85