STORZ & BICKEL Mighty+ Kurzgebrauchsanweisung Seite 21

4.
5.
6.
7.
8.
C L E A N I N G / H Y G I E N E
When cleaning the Cooling
Unit Cap in isopropyl
alcohol, remove the Cap
Lock by pulling it up on one
side.
Unscrew the Cooling Unit
base from the Vaporizer by
turning it 90° counterclock-
wise.
Lever out the large Base
Seal Ring with Filling
Chamber Tool at the recess
in the groove.
Remove the small Base
Seal Ring.
Press the Screen with the
Filling Chamber Tool from
the top to the bottom out
of the Cooling Unit base.
Place all parts of the Cool-
ing Unit in warm rinsing
water.
Alternatively: Soak all parts
of the Cooling Unit (except
cap lock) in isopropyl alco-
hol for a maximum of 1/2
hour. Rinse all parts under
running water for at least
one minute. Let all parts
dry completely.
21