Technical Data - Hilti AG 5D-22-125 Original Bedienungsanleitung

Item Equipment
H Kwik lock (optional
instead of H)
I Clamping nut for
abrasive resin-fiber
wheel
J Support plate
5

Technical data

Rated voltage
Rated speed
Maximum wheel diameter
Weight in accordance with EPTA Procedure 01, without battery
Thread diameter
Spindle length
Ambient temperature for operation
Storage temperature
5.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound power level (L
WA
Uncertainty for the sound power level (K
Vibration information
Other applications, such as cutting, may produce vibration values that deviate from the given values.
Surface grinding with the vibration-absorbing side handle
(a )
h,AG
*2272031*
AC­D AG­D,
AF­D,
AN­D
X X
— —
— —
)
pA
)
pA
)
)
WA
2272031
DG-CW DC-TP,
(SPX, SP, DC-D
P) (SPX, SP,
P)
— X
— —
— —
B 22­55
B 22­170
AP-D 3CS, 4CS,
3SS, 4SS,
DD-M14
— —
X —
X —
21.6 V
9,000 /min
125 mm
2.1 kg
M14
22 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
85 dB(A)
3 dB(A)
96 dB(A)
3 dB(A)
AG 5D-22
5.4 m/s²
4.6 m/s²
English 31