Technical Data - Hilti AG 125-19SE Original Bedienungsanleitung

Diamond cut-off wheel
Abrasive grinding disc
Diamond grinding disc
Wire brushes
Diamond core bit
Abrasive resin-fiber disc
Suitability of wheels for the equipment used
Item Equipment
A Guard
B Front cover (in
combination with
A)
C DG-EX 125/5" dust
hood for grinding
D DC-EX 125/5"C dust
hood for cutting (only
in conjunction with A)
E DC-EX 125/5"M dust
hood for slitting
F DC­EX SL adapter (in
conjunction with E)
G Side handle
H DCBG 125 hoop
handle (optional for
G)
I Clamping nut
J Clamping flange
K Kwik lock (optional
for I)
L Clamping nut for
abrasive resin-fiber
wheel
M Support plate
5

Technical data

For rated voltage, rated current, frequency and/or input power, refer to the rating plate.
If the product is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the product. The operating voltage of
the transformer or generator must always be within +5 % and -15 % of the rated voltage of the product.
Rated speed
Maximum disc diameter
Thread diameter
24 English
Application
Cutting, slitting
Rough grinding
Rough grinding
Wire brushes
Drilling in tiles
Rough grinding
AC­D AG­D,
AF­D, (SPX, SP,
AN­D
X X
X —
— —
— —
— —
— —
X X
X X
X X
X X
X X
— —
— —
Designation
DC-TP, DC-D (SPX,
SP, P)
AG­D, AF­D, AN­D
DG-CW (SPX, SP, P)
3CS, 4CS, 3SS, 4SS
DD-M14
AP-D
DG-CW DC-TP,
DC-D
P) (SPX, SP,
P)
X X
— X
X —
— X
— X
— X
X X
X X
X X
X X
— X
— —
— —
Material
Mineral
Metal
Mineral
Metal
Mineral
Metal
AP-D 3CS, 4CS,
3SS, 4SS,
DD-M14
X X
— —
— —
— —
— —
— —
X X
X X
— —
— —
— —
X —
X —
AG 125-19SE
11,500 /min
125 mm
M14
2143513
*2143513*