Steps
1. Remove the (M2x3.5) screw that secures the WLAN-card bracket and the WLAN card on the system board.
2. Slide and remove the WLAN-card bracket from the WLAN card.
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card.
4. Slide and remove the WLAN card from the WLAN-card slot on the system board.
Installing the WLAN card
Prerequisites
Wenn Sie eine Komponente austauschen, muss die vorhandene Komponente entfernt werden, bevor Sie das
Installationsverfahren durchführen.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Entfernen und Einbauen von Komponenten
21