Installing The Optional Hdmi Module - Dell OptiPlex 3000 Thin Client Servicehandbuch

Steps
1. Remove the two (M3X3) screws that secure the optional HDMI module to the computer chassis.
2. Disconnect the HDMI module cable from the connector on the system board.
3. Remove the HDMI module from the system.

Installing the optional HDMI module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the optional HDMI module and provides a visual representation of the installation
procedure.
NOTE: Optional VGA and DisplayPort modules have similar procedure as optional HDMI module.
Entfernen und Einbauen von Komponenten 25