SUPAIR STRIKE 2 Betriebshandbuch Seite 63

Harness User's manual | STRIKE 2
10
Insert the curved end of the rod into hole 3 to lock the handle.
11
Shape the closed rescue pocket in order to get a round shape on the
lower part.
Locking the reserve parachute handle
hole 3
INSTALLING THE RESERVE PARACHUTE
Mandatory extraction test procedure
Have the installation checked by a professional outfit.
As the volume of the folded parachute may vary, check the proper
functioning of the parachute pocket during an extraction test. It is
necessary to perform this test every 6 months.
Note :
Conducting and extraction test does not imply deploying the reserve
parachute which will stay inside its POD.
Check the completed
installation during a
hang-test.
SUPAIR | STRIKE 2 | page 23