SUPAIR STRIKE 2 Betriebshandbuch Seite 56

Harness User's manual | STRIKE 2
The harness is delivered with solo dyneema risers. The risers sleeve is designed to work only with this model.
- Place the risers inside their guiding/protec-
1
tive sleeve connected alongside the harness.
Risers mustn't be too stretched.
- Bring them out through the reserve para-
chute container
INSTALLING THE RESERVE PARACHUTE
Place the risers inside the sleeve
- Use the Zip to close the sleeve until the left
2
shoulder strap
SUPAIR | STRIKE 2 | page 16