SUPAIR STRIKE 2 Betriebshandbuch Seite 55

Harness User's manual | STRIKE 2
>> Access to the reserve parachute connection points.
First, open the riser guiding sleeve all the way from top to bottom to access the reserve parachute connec-
tion loops. Once the riser guiding sleeve is fully opened, the zipper tab must be located on the same side of
the reserve parachute pocket.
We recommend the use of the risers supplied with the
harness to ensure optimal opening of the reserve.
A Fastening the risers to the harness via a Lark's head knot connection.
1 Attach each riser to the
shoulder attachment points by
making a Lark's knot ( loop to
loop connection ). Use the larg-
est bridle loop ends.
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection
Assemble everything
2
correctly.
Make sure for the risers
not to be longer than one
another.
Tighten each connection securely.
3
SUPAIR | STRIKE 2 | page 15