Harness User's manual | STRIKE 2
Carabiners
Compatible carabiners :
Carabiners Plume Grivel
Réf. : MAILPLUM
Insert the carabiner
through the 3 harness
riser connection.
The Strike 2 was designed to also be flown
with dyneema connectors
(ref: MAILCONNECT).
This lightens the material and makes the leg
straps fixed as for the X-Alps harness. You
will then have to put on the harness like a
climbing harness.
Lock the carabiner using
an O-ring to prevent it
from pivoting.
ACCESSORIES ASSEMBLY
Removable comfort plate
1.
Open the zip of the rear storage pocket
2.
Open the zip of the protection location
3.
Slide the plate into its housing and close the 2 zips
The removable comfort plate can be removed for sportier use. The har-
ness then becomes lighter and more compact when stored.
SUPAIR
| STRIKE 2 | page 9