Grundig GDT 2561 X Bedienungsanleitung Seite 11

4 Cleaing and maintenance
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of the grease filter
Grease filter retains the oil particles in the air.
Grease filters may change colour after repeated
cleaning. This is normal and does not require re-
placement of filters.
1
1. External grease filter
2. Internal grease Filter
• Pull the sliding plate out by holding the front
panel. Remove the external grease filter first,
and then the internal grease filter.
• Push the grease filter lock forward.
• Then lower it slightly down and pull it out. Oth-
erwise, you can bend the filter. Wash and rinse
grease filters with liquid detergent and replace
grease filters to their sockets by by carrying out
the steps specified above in reverse order. This
filter retain the oil particles in the air.
C
You may wash your grease filters in
the dishwasher.
A
CAUTION: In case of normal use,
clean your filter once in a month.
Cooker Hood / User Manual
4.2 Replacement of carbon filters
Odour removing filters contain charcoal (Active
carbon). Grease filters must be installed in the
product, regardless of whether or not carbon fil-
ters are used.
2
• Remove the grease filter.
• To remove the carbon filter, remove the car-
bon filter from its housing by rotating it coun-
ter-clockwise from the tab.
• Install the new carbon filter.
• Install the grease filter.
CAUTION
• Carbon filter shall never be
A washed.
• Replace carbon filters once every
3 months.
• You can obtain the carbon filter
from the authorized services.
11 / EN