Advice On Use; Maintenance And Cleaning; Disposal; Service Centre - Parkside XQ2 SE Bedienungs- Und Sicherheitshinweise

Preparing for use / Maintenance and cleaning / Disposal / Information
j
Always use sanding sheets with grades that
are suitable for the particular surface you are
sanding.

Advice on use

Q
j
Switch the device on before placing it against
the workpiece.
j
Apply light sanding pressure only.
j
Advance the device at an even rate.
j
Change sanding sheets at the appropriate time.
j
Do not work on different types of material using
the same sanding sheet (e.g. wood and then
metal). To achieve the best sanding results you
should use unworn, undamaged sanding sheets.
j
Clean the sanding sheet from time to time with
a vacuum cleaner.
j
Sand difficult to reach places with the front or
side corners of the backing plate
j
Work in parallel and overlapping widths.
j
After sanding the workpiece, lift the device
from the workpiece before switching it off.

Maintenance and cleaning

Q
WArnIng!
Always pull the mains plug is out
of the socket before doing any work on the device.
The delta sander is maintenance-free.
j
Clean the device frequently. This should be done
immediately after you have finished using it.
j
For cleaning the housing use a dry cloth only.
j
Remove any adhering sanding dust with a
narrow paint brush.
j
Never any kind of sharp object or petrol,
solvents or cleaning agents that might attack
plastic. Do not allow any liquids to enter the
inside of the device.
j
Always keep the ventilation slots

Disposal

Q
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
All manuals and user guides at all-guides.com
.
7
clear.
6
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive 2002 / 96 / EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected separately
and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Information
Q

Service centre

Q
J
WArnIng! Have your device
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
J
WArnIng! If the plug or mains
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.

Warranty

Q
this appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. your goods can
be transmitted free of cost only in this
manner. this warranty applies only to the
initial purchaser and is non-transferable.
The warranty covers only material or manufactur-
ing faults, not normal wear or damage to fragile
parts such as switches or rechargeable batteries.
GB/MT 29