Team Kalorik TKG FT 1012 Bedienungsanleitung Seite 13

BEFORE THE FIRST USE
• Remove all packaging materials.
• Check package content to verify it is complete and undamaged. Do not operate
the appliance if the content is incomplete or appears damaged.
NOTES:
The appliance may produce an odor and/or emit smoke when switched on for the
➢
first time, as residues from the production process are eliminated. This is normal and
does not indicate a defect or hazard. Ensure ample ventilation.
Clean the appliance thoroughly before using for the first time (Cleaning and
➢
Maintenance).
ASSEMBLY
See Illustrations
Place the appliance on a clean, flat and heat resistant surface.
•
Basket handle assembly (7) :
1. Place the pegs into the two holes in the basket bracket.
(The pegs are the ends of the two basket handle bars)
2. Rotate the handle towards the basket rim, allowing the handle bars to lock into
place on the outer sides of the basket's bracket.
3. The handle is now in the locked position.(ill. a and b).
Do not assemble any other way (ill. c).
1.
• Before using your appliance make sure:
The oil reservoir (9) is secured in the correct position with the oil filter cover
o
(11) and oil valve (12) on the same side as the oil filtration control knob (14)
(ill. d). Ensure the oil filter cover (11) is in place inside the oil reservoir (9).
The control panel (21) is placed on the connecting plate on the back of
o
the housing (13). Ensure the grooves of the connecting plate are in the
guides of the control panel (ill. e).
NOTES:
Your appliance is equipped with a safety switch (5) located on the control panel
➢
(21). If the control panel (21) is not placed properly in its position, the appliance will
not operate.
2.
13
3. Incorrect Position
TKG FT 1012