Team Kalorik TKG FT 1012 Bedienungsanleitung Seite 12

CAUTION: the deep fryer can reach high temperatures when in
use. Oil and fat preparations might catch fire if overheated. Be
extremely cautious never to leave your deep fryer in use for long
periods. Do not forget to switch off the appliance once your
preparation is ready and the fryer is no longer in use. Before
pulling the mains plug, switch the temperature selector to "MIN".
Provide proper ventilation when using the appliance.
❑
If you wish to use solid fat, cut it into small pieces and place
❑
them into the bowl. Slide the temperature knob to its minimum
position. Each time the pilot light goes out, slide the
temperature knob to a slightly higher temperature until all the
fat has melted. Once all the fat has melted, set the
temperature knob to the desired cooking temperature. This
type of fat will solidify when the appliance cools down.
Your appliance must never be switched on through an
❑
external timer or any kind of separate remote control system.
Please note: Should the symbol
❑
surface, you need to be careful when handling the product.
This symbol means: CAUTION, this surface may get very hot
during use.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid all
danger. In case of need you should return the appliance to this
electrician.
TKG FT 1012
is always put on the surface with the highest
be indicated on a certain
12