Original Accessories / Tools; Before Use; Selecting The Grinding Disc; Changing Sanding Sheets - Parkside PEXS 270 A1 Bedienungs- Und Sicherheitshinweise

General safety advice for electrical power tools / Before use / Commissioning
½
Permit the switched off appliance to
come to a complete standstill before
putting it down.
½
The appliance must always be kept
clean, dry and free of oil or grease.
½
Keep your workplace clean. Material
mixtures are particularly dangerous. Light met-
al dust can burn or explode.
½
Do not use the electric tool with a
damaged lead. Do not touch the damaged
lead and remove the mains plug if the lead be-
comes damaged while you are work-ing with
the device. Damaged leads increase the risk of
an electric shock.
©

Original accessories / tools

½
Use only the accessories detailed in
the operating instructions. The use of in-
serted tools or accessories other than those
recommended in the operating instructions
could lead to you suffering an injury.
©

Before use

©

Selecting the Grinding Disc

Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
lease note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.
©

Changing sanding sheets

WARNING!
carrying out work on the appliance, always re-
move the plug from the power socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Lift the grinding disc
from the backing pad
10 GB/CY
Downloaded from www.Manualslib.com
RISK OF INJURY! Before
at the side and pull it off
5
in order to remove it.
4
manuals search engine
Note: Before securing a new sanding sheet
remove all dust and dirt from the sander plate
Ensure that the openings in the sanding sheet
concur with the boreholes of the sanding plate
©

Dust / Swarf Removal by Suction

½
Please note the "Safety instructions" section.
Removal by Suction with Dust Collector:
Push the dust collector
device.
In order to empty the dust collector
off the device.
Note: Empty the dust collector
time and regularly in order to ensure the opti-
mum removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
Push the adapter for external exhaust suction
on to the exhaust nozzle
wise to fix it in place. If necessary, use the re-
ducing piece 8 by pushing it into the adapter
for external exhaust suction
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
adapter for external exhaust suction
the reducing piece if necessary
Removal:
Pull the hose of the suction device off the
adapter for external exhaust suc-tion
Turn the adapter for external exhaust suction
in an anticlockwise direction and pull it off with
the reducing piece
8
©

Commissioning

©
Switching on and off
Note! Always switch the rotary sander on before
applying it to the material to be worked, then make
contact with it.
When operating the device you can select between
intermittent or continuous operation mode:
5 ,
.
4
5
4 .
completely onto the
3
pull it
3
in good
3
7
and turn it clock-
6
.
7
, using
7
.
8
.
7
7
if necessary.