Using The Appliance As A Bedside Lamp; Midnight Light; Settings - Philips HF3670 Bedienungsanleitung

Using the appliance as a bedside lamp

Midnight Light

Settings

You can use the connected Sleep & Wake-Up Light as a bedside lamp.
Press the bedside lamp icon
Note: You can increase and decrease the brightness intensity. You can select a
brightness between 1 (low) and 25 (high). The default brightness setting is 20.
To switch off the light, press the cross icon in the menu.
Tip: When the light is on, you can also turn off the light with a single tap on the
top of the appliance. All active programs will stop. Set alarms remain active.
If you wake up during the night, you can tap the top of the appliance to
activate a dim light. This dim, subtle orange light provides you with just enough
light to find your way in the dark. Switch off the Midnight Light by tapping the
top of the appliance again.
Note: The Midnight Light cannot be activated directly when the main light is
already on. In that case, first tap the top of the appliance to deactivate the main
light. Then tap again to activate the Midnight Light.
Press the settings icon to open the settings menu.
Note: Press and hold the settings icon for 8 seconds to open a new menu, in
which you can select VERSION (firmware version of the appliance) or DEMO
mode (accelerated wake-up curve).
In the settings menu, you can adjust the clock time (when Wi-Fi is disabled), the
audio feedback, the display brightness of the appliance and enable/disable Wi-
Fi.
on the display to switch on the bedside lamp.
English
15