Connecting Your Appliance To Wi-Fi - Philips HF3670 Bedienungsanleitung

Connecting your appliance to Wi-Fi

Easy Wi-Fi setup
AmbiTrack sensors
If the appliance is updated through connecting it to Wi-Fi with the app, the
information in this document may not be up to date. Find the latest user
manual on www.philips.com/support. Philips reserves the right to update the
firmware of the appliance.
Download the Philips SleepMapper app from Google Play or the App Store on
your mobile phone. See the information in Google Play or the App Store to
check if your mobile phone is compatible with the app. You can easily set up
the Wi-Fi connection to your connected Sleep & Wake-Up Light.
The setup to install your Sleep & Wake-Up Light and connect to your home Wi-
Fi network only needs to be done once. This setup will take approximately 5-10
minutes.
Setup wizard of the connected Sleep & Wake-Up Light
1 When you use your connected Sleep & Wake-Up Light for the first time, a
setup wizard starts on the appliance.
2 After selecting your language on the display of the appliance, continue in
the app. Make sure that you have the app open on your mobile phone.
3 Follow the instructions in the app to connect your appliance to the Wi-Fi
network. If you have trouble connecting your appliance, check the support
section in the app or the items mentioned in the troubleshooting section in
this user manual (see 'Troubleshooting').
-
If you previously chose to set up your appliance without the app, but now
want to connect your appliance to the app, press the Wi-Fi icon
settings menu of your appliance. The access point mode icon
shown on the display. Open the app on your mobile phone to connect.
-
If you have changed your Wi-Fi home network or changed your password,
press and hold the Wi-Fi icon
seconds. The access point mode icon
the app on your mobile phone to connect.
The Wi-Fi connection issue icon might appear on the display if a connection
cannot be established. Check the troubleshooting section to solve the problem.
Note: The app on your mobile phone and your connected Sleep & Wake-Up
Light can ONLY communicate with each other when both appliances are
connected to the same home Wi-Fi network. If this is not the case, you cannot
remotely control the appliance through the app (e.g. set an alarm).
The connected Sleep & Wake-Up Light collects input from its surroundings
through the AmbiTrack sensors. AmbiTrack sensors measure light, humidity,
temperature and sound pressure. These factors can influence your sleep. Only in
the app you can see information on the recommended values for ideal sleep
conditions. The measurements of the sensors can be influenced by the
surroundings of the appliance. For example, if you place the appliance next to a
window or near a heating source such as a radiator, the temperature and
in the settings menu of your appliance for 8
will be shown on the display. Open
English
11
in the
will be