Before First Use; Setting Up - Silvercrest SRGF 1400 A1 Bedienungsanleitung

Before first use
1) Clean all of the components as described in the section Cleaning and care
to remove any packaging residue. Make sure that all parts are completely
dry before operating the appliance.
2) Set up the appliance as described in the section Setting up.
3) Insert the plug into a mains power socket.
4) Turn the temperature control 5 to MAX. The operating light 4 lights up to
show that the appliance is heating up.
5) After 20 minutes, turn the temperature control 5 to 0.
6) Disconnect the plug and allow the appliance to cool down.
NOTE
► The first time the appliance heats up, a small amount of smoke and odour
may result from production-related residues. This is normal and is complete-
ly harmless. Ensure sufficient ventilation; for example, by opening a win-
dow.
7) Clean the griddle 3 again as described in the section Cleaning and Care.
8) Ensure that all parts are completely dry before operating the device.

Setting up

WARNING! RISK OF FIRE!
► Never place the device underneath wall cupboards or next to curtains,
cupboard walls or other flammable objects.
► Always place the appliance on a heat-resistant surface.
1) Place the appliance on a clean and level heat-resistant surface. Ensure that
you do not place the appliance directly next to a wall or a cupboard. Each
person should have unimpaired access to the pans 7 and the forks 9.
2) Place the griddle 3 on the appliance with the grooved grilling surface facing
upwards.
3) Insert the plug into a mains power socket.
4) If you want to use the fondue pot 2, proceed as described in the section
Fondue.
│ GB │ IE
■ 6 SRGF 1400 A1