Meec tools 018285 Bedienungsanleitung Seite 50

EN
TROUBLESHOOTING
PROBLEM
The product will not start.
The product works
intermittently.
Noise/heavy vibrations.
The product does not blow.
The motor switches off
when in use.
Reduced performance.
50
POSSIBLE CAUSE
The product will not start.
The power switch is faulty.
Defective motor.
The temperature of the battery
is too high or too low.
The product is defective.
Internal electrical fault in the
product.
The power switch is faulty.
The product is defective.
The nozzle is blocked.
The product switches off.
Discharged battery.
The battery is mot correctly
inserted.
The battery is defective.
The battery is discharged.
The battery is not fully charged. Charge the battery.
ACTION
Check the battery. Repairs must
be carried out by an authorised
electrician.
Take the product to an authorised
service centre, or other qualified
personnel, to be checked and
repaired.
Take the product to an authorised
service centre, or other qualified
personnel, to be checked and
repaired.
Wait until the battery has reached
charging temperature.
Contact an authorised service centre.
Contact an authorised service centre.
Contact an authorised service centre.
Contact an authorised service centre.
Clear the blower.
Switch off the product and charge
the battery if the air speed is
considerably reduced.
Charge the battery.
Insert the battery correctly.
Clean the battery terminals,
replace the battery.
Replace the battery.