Maintenance And Storage; Work Area - Meec tools 018285 Bedienungsanleitung

• Failure to handle the battery carefully can
cause fluid to leak from the battery. Avoid
contact with battery fluid. On contact with
battery fluid, rinse immediately with
plenty of fresh water. If you get battery
fluid in your eyes, rinse your eyes with
clean water for at least 10 minutes and
then seek medical attention immediately.
Battery fluid can cause skin irritation and/
or burns.
• Read all the instructions and safety
instructions for the charger and/or
battery.

MAINTENANCE AND STORAGE

• Switch off the product, pull out the plug,
and wait until all moving parts have
completely stopped before checking,
adjusting, maintenance and/or replacing
accessories, and before putting into
storage. Allow the product to cool before
checking, adjusting, maintenance or
replacing accessories, and before putting
into storage. Maintain and take good care
of the product according to the
instructions.
• Store the product in a dry place out of the
reach of children.
• Allow the product to cool before putting
into storage.
• Be careful when working near the cutting
system, even if the product is switched off
by the safety interlock – the cutting system
can move even when the motor is not
running.
• Replace damaged or worn parts. Only use
spare parts and accessories recommended
by the manufacturer.
• Never attempt to bypass the interlocks
and safety devices on the product.
• Repairs must only be carried out by
qualified personnel. There is a risk of
personal injury if unqualified persons
carry out service or maintenance on the
tool.
ADDITIONAL SAFETY INSTRUCTIONS
• Always check that all the parts are
correctly fitted before use.
• The operating temperature for the battery
is 0 to 45°C.
SAFETY INSTRUCTIONS FOR
CHARGER
WARNING!
Read all warnings, safety instructions and
other instructions. Failure to follow all the
instructions and safety instructions can
result in the risk of electric shock, fire and/or
serious personal injury.
Save these instructions and safety instructions
for future reference. The term "power tool" in
all the warnings below refers to mains-powered
(corded) or battery-powered (cordless) power
tools.

WORK AREA

• Keep the work area clean and well lit.
Dark and cluttered work areas increase
the risk of accidents and injuries.
• Do not use power tools in explosive
environments, such as in the vicinity of
flammable liquids, gas or dust. Power
tools produce sparks that can ignite dust
and fumes.
• Keep onlookers, especially children, and
pets at a safe distance when using power
tools. You can easily lose control of the
power tool if you are distracted.
ELECTRICAL SAFETY
• The plug must fit properly in the power
point. Never modify the plug in any way.
Never use adapter plugs with earthed
power tools. Unmodified plugs and
matching outlets reduce the risk of electric
shock.
EN
43