Modster HOBBY Arrows 1300mm Zivko Edge 540 Betriebsanleitung Seite 19

Manual - Zivko Edge 540
Rear landing gear set installation
1. Carefully Install the rear landing gear set to the
vertical stabilizer with the included screws as
shown.
Horizontal stabilizer installation
1. Slide the horizontal stabilizer spar
into the pass through at the rear of
the aircraft.
2. Install the 2 piece (left and right)
horizontal stabilizer as shown.
Ensure the control horn faces down.
Linkage rod installation
1. Install the pushrod to the control
horn on the horizontal stabilizer as
shown.
www.modster.at
3. Secure the horizontal tail in place
using the included screws.
2. Install the pushrod to the control
horn on the vertical stabilizer as
shown.
19