Lionelo Basti aan One Bedienungsanleitung Seite 14

Safety seat belts height adjustment (fig. 12)
1.
A suitable belts height assures increased comfort and safety of
your child. The height must be adapted in a way that two fingers
fit between the child and belts.
2.
To adjust the height, loosen the belts and remove them from the
buckles in the back of the safety seat.
3.
Take the shoulder belts out through the safety seat holes and insert
in holes at relevant height.
4.
Assemble the belts in buckles again.
REMOVING COVER
1.
Remove 5-point belts of the safety seat.
2.
Remove the cover from the base and backrest.
3.
Set a top position of the headrest.
4.
Remove the cover.
To apply the cover again, retake the aforesaid actions
in reversed order.
NOTE: Never use the safety seat without the cover.
SAFETY SEAT INCLINATION (fig. 13)
To incline the safety seat, grab the handle located between the safety
seat and base, and set in a required position.
To adjust the lying position, press the rotation button, turn the safety seat
by 180° and then set the lying position of the backrest.
SAFETY SEAT ROTATION (fig. 14)
Before rotate the seat, loosen TopTether. To rotate the safety seat, press
the rotation button and rotate the safety seat.
CAUTION: Before the travel, make sure the safety seat has been locked
and cannot rotate on its own.
EN ‑ 14 ‑