Herunterladen Inhalt Inhalt Diese Seite drucken

Lionelo Braam Bedienungsanleitung Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
HOW TO ADJUST THE HEADREST
• Loosen the shoulder belts as much as you can.
• To change height of the headrest, grab and pull the headrest height adjustment lever (R).
• Choose the headrest height you desire. (See: fig. 12).
Note! The height of shoulder belts is integrated with the headrest height. A properly set
headrest provides optimal protection to your child in the child safety seat:
The headrest must be adjusted so that shoulder belts and child's arms are at the same
level. The belts must not be too high (at the ears level or higher) or too low (e.g. behind
the child's back). (See: fig. 11)
• Headrest is too low.
• Headrest is too high.
• Headrest is adjusted correctly.
HOW TO ROTATE THE CHILD SAFETY SEAT
To take the child out or place the child in the child safety seat comfortably:
• Pull out the base 360° rotation button (M).
• Next rotate the child safety seat in any direction (360°).
• When you can hear a distinctive „click", it means the child safety seat has been secured
as desired. Then you can be sure the product is safe. (See: fig. 13)
Note! Make sure the base rotation button is secured in its place after changing direction
of the child safety seat.
• Correct position of the child safety seat in relation to driving direction and applicable groups:
a. Rear-facing position – group 0+, I (0 – 18 kg) (See: fig. 14)
b. Forward-facing position – group I, II, III, (9 – 36 kg) (See: fig. 15)
HOW TO ADJUST INCLINATION ANGLE OF THE CHILD SAFETY SEAT
Grab the lever (O), pull up and change inclination angle of the child safety seat. (See: fig. 16)
You can choose 5 levels of child safety seat inclination, depending on the child's size:
Group 0+, I (0 - 18kg)
Position 5
To set the child safety seat in position 5:
• Press the base rotation button (M), rotate the child safety seat to the rear-facing position.
• Pull the seat tilting grip (O) and tilt the product to position 5. It is a half-lying position
dedicated to small children from group 0+, I (0-18 kg). See: fig. 16 and 17
• Children from group I (9 - 18 kg) can be in a forward- or rear-facing position. Suitable
positions of the seat inclination for these children are positions 1-5 (1-4 in a forward-
facing position, 5 in a rear-facing position). See: fig. 17
EN
Group I (9 - 18kg)
Position 1 - 4
‑ 12 ‑
Group II, III (15 - 36kg)
Position 1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis