Lionelo Levi Simple Bedienungsanleitung Seite 12

The place in which you assemble the child safety seat must be equipped
with a 3-point safety belt (group I, II, III).
2.1 Seat liner
For protection of your child
•
The seat liner (K) in your car is intended for babies, improves their
comfort and provides additional support. If the child needs more
space in the child safety seat, remove the seat liner. See: fig. 5
2.2 How to adjust the headrest height
•
The headrest of the child safety seat can be set at 6 levels.
•
Pull the headrest height adjustment lever (N) to adjust the headrest
height. See: fig. 7
•
Choose a suitable height of the headrest for your child; make sure
the headrest does not press against the child's arms and child's
head is not higher than the upper part of the headrest. See: fig. 9
Very important!
2.3 How to secure the child with child safety seat belts properly.
•
Loosen shoulder belts in accordance with the manual (see chapter 2.4.)
• Do not pull protective cushions located on the belts.See: fig. 11
•
Press the red button on the buckle (J) to unfasten 5-point safety
belts and open the buckle with belts (I). See: fig. 12
• Next place child safety seat belts on sides, put the child in. See: fig.13
•
Adjust the headrest height (see chapter 2.2).
•
Adjust the height of the shoulder belts (see chapter 2.4). Pull the
belts tension adjustment (M) so that belts fit tight the child's arms.
Make sure the cushion touches the child's arm and is not twisted
with belts. See: fig. 17
• Join the right and left part of the child safety seat belts. See: fig. 14
EN
Make sure the height of the headrest is suitable.
‑ 12 ‑