Lionelo Levi Simple Bedienungsanleitung Seite 13

•
Put two parts of the belts into the buckle until you can hear
a distinctive „click". See: fig. 15
2.4 How to adjust child safety seat belts.
The child safety seat belts can be set at 3 levels.
•
Check if the height of 5-point safety belts is suitable for your child.
The belts must go through slits located at arms level or slightly
above. Remove tips of shoulder belts attached to the safety belt
connector (Q). Pull both belts through slits in the child safety seat
backrest. Again pull the belts (from the front to the back of the
product), this time through slits whose height corresponds to the
size of your child. Put the belts into the relevant hole and attach
the belts to the belt connector (Q). See: fig. 10
To loosen belts:
•
Press the belt tension adjustment button (F).
•
Gently pull both safety belts of the child safety seat with another
hand, this is how you can loosen the belts. See: fig. 6
To tighten belts:
•
Pull the belt tension adjustment (M) (fig. 1).
• Make sure the belts are not too tight for your child. See: fig. 16
Note! Do not transport your child in its jacket.
2.5 How to disassemble and install 5-point child safety seat belts.
Before you assemble the child safety seat for group II and III, please
disassemble the child safety seat belts.
A. How to remove 5-point safety belts.
•
Press the belt tension adjustment button (F), loosen 5-point safety
belts and unfasten belts. See: fig. 25
•
Remove tips of shoulder belts attached to the safety belt connector
‑ 13 ‑ EN