Safety; Intended Use And Foreseeable Misuse; Safety Features - Torqeedo Cruise 3.0 R Originalbetriebsanleitung

DE EN

3 Safety

3.1 Intended use and foreseeable misuse

Intended use:
Drive system for marine craft.
The Cruise system must be operated in chemical-free waters with sufficient
depth.
Intended use also includes:
• The fastening of the Cruise system at the attachment points provided for
this purpose and compliance with the prescribed torques.
• Observing all the instructions in these instructions.
• Adherence to the maintenance and service intervals.
• The exclusive use of original replacement parts.
Foreseeable misuse:
Any use other than or exceeding the use specified under "Intended use" is con-
sidered unintended use. The operator bears sole responsibility for damage result-
ing from unintended use and the manufacturer accepts no liability whatsoever.
Among other things, the following are considered unintended use:
• Underwater deployment of the Cruise system.
• Operation in waters to which chemicals are added.
• The use of the Cruise system outside of marine craft.
54

3.2 Safety features

The Cruise system and accessories have many
safety features.
Safety features Function
Emergency stop mag- Immediately disconnects the energy supply to
netic chip the motor. The propeller comes to a standstill, the
system remains switched on.
Kill switch cord or Immediately disconnects the power supply and
emergency kill switch switches off the Cruise system. The propeller comes
to a standstill.
Fuses (in Power To prevent fire/overheating in the event of a short
48-5000 and Power 24- circuit.
3500 battery)
Electronic Prevents uncontrolled start-up of the Cruise system
accelerator lever or after switching on. To drive, the gas accelerator lever
tiller /tiller must first be moved to the neutral position
and the emergency stop magnetic chip must be
applied or the emergency kill switch/kill switch
cord must be moved to the position for normal
operation.
Electronic Secures the motor against overcurrent, overload
fuse and
reverse polarity.
Overtemperature Automatically reduces the power of the electronics
protection or the motor to prevent overheating.
Motor protection Protects the motor from thermal and mechanical
damage if the propeller is blocked, e.g. by ground
contact, retracted cords or similar.