Return To The Starting Point Of The Title Or To A Defined Spot (Cueing); Pitch Adjustment - Omnitronic TMC-2 MK2 Bedienungsanleitung

7.9 Return to the starting point of the title or to a defined spot (cueing)

To quickly jump to a defined spot, three starting points (cue points) can be stored permanently for the
buttons [HOT CUE 1] to [3]. The cue points well be kept even after closing the program and can be
overwritten and deleted at any time. With the button [CUE] you can return to the beginning of the title or a
cue point defined before, and momentarily play the title.
Button [CUE]
1
To jump to the starting point of a title, press the button [CUE] in pause or play mode. Now the unit is in
pause mode at the starting point of the title (LED of the button CUE lights up red).
2
After jumping to the cue point, playback can be started with the button ► [PLAY]. Alternatively, you can
keep the button [CUE] pressed and momentarily play the title. As soon as you release the button the
unit instantly returns to the cue point and is in pause mode.
3
If cue points have been stored with the buttons [HOT CUE 1] to [3], pressing the button [CUE] will not
return you to the starting point of a title but to the cue point stored last.
Buttons [HOT CUE 1] to [3]
1
To set a cue point while playing a title, either press one of the buttons [HOT CUE 1] to [3] when the
desired spot is reached (fly cue) or set the unit to pause at the desired spot with the button II [PAUSE]
precisely select the desired spot with the [JOGDIAL], and then press one of the buttons [HOT CUE 1]
to [3].

Virtual DJ adds a marker in the waveform display for each cue point.
2
It is now possible to jump to the corresponding cue points with the buttons [HOT CUE 1] to [3]. The title
is played from the cue point.
3
Pressing the buttons [HOT CUE 1] to [3] several times will restart the title from the cue point, creating a
stutter effect.
4
To overwrite a cue point stored on the buttons [HOT CUE 1] to [3], set a new cue point with the button
[CUE].
5
To delete a cue point, right-click the marker in the waveform display with the mouse and select [Delete].
With the option [Rename], you can specify your own name for a cue point.
6
Pressing the button II [PAUSE] subsequently cycles through the beginning of the title and all cue
points.

7.10 Pitch adjustment

The playback speed can be adjusted variably up to ±100 % with the [PITCH SLIDE CONTROL].
1
The adjusting range for the speed is preset to ±12 %. Each push of the button [PITCH] switches
between ±100 %, ±6 %, ±12 % and back to ±25 %.
2
Then slide up the [PITCH CONTROL] to decrease the pitch and slide it down to increase it.

The display shows the percentage deviation from the standard speed. The number of beats changes
accordingly.
3
The [PITCH CONTROL] locks into place in mid-position. In this position a title is played at standard
speed.
62/72 00061967.DOC, Version 1.1