Connecting The Controller; Connecting Audio Units - Omnitronic TMC-2 MK2 Bedienungsanleitung

6. CONNECTING THE CONTROLLER

6.1 Connecting audio units

1
Set up the controller on a plane, stable ground.
2
For prefader listening to both decks it is possible to connect stereo headphones optionally via a 6.3 mm
plug to input [HEADPHONE 1] or a 3.5 mm plug to input [HEADPHONE 2].
3
You can connect a DJ microphone (balanced or unbalanced) optionally via an XLR plug to microphone
input [MIC 1] or a 6.3 mm plug to microphone input [MIC 2].

Balanced cables provide +6 dB more output and guarantee a better protection against interference in
case of long cable runs.

The microphone signal is directly mixed to the signal sum.
54/72 00061967.DOC, Version 1.1