Configuration Of Virtual Dj Le - Omnitronic TMC-2 MK2 Bedienungsanleitung

6.3 Configuration of Virtual DJ LE

1
When running Virtual DJ LE for the first time, you will need to configure the software for use with the
controller. Call the software's configuration menu with the button [CONFIG] and select the [Sound
Setup] tab.
2
3
4
2
Leave control panel [Inputs] at [NONE].
3
In control panel [Outputs], select [HEADPHONES]. The two output channels [Master: First card] and
[Headphones: Second card] will be available.
4
In control panel [Sound card], select [2 CARDS] and in the adjacent panel [CONTROL MAIN] (=master
channel) and [CONTROL HEADPHONE] (=headphones channel).
5
Confirm your settings with [Apply].
57/72 00061967.DOC, Version 1.1