Omnitronic TMC-2 MK2 Bedienungsanleitung Seite 46

32 Headphones inputs
6.3 mm and 3.5 mm jacks [HEADPHONE 1] and [2] for
connecting stereo headphones (impedance ≥8 ).
33 Control CUE LEVEL
Level control for headphones connected to the jacks
HEADPHONE 1] and [2].
34 Control CUE
For selecting and crossfading the monitoring signal for
the headphones.:
• Position [CUE 1]: Deck A is monitored
• Position [CUE 2]: Deck B is monitored
35 Control X-FADER CURVE
Adjusts the characteristic of the crossfader:
• left position: smooth crossfading (gradual transition)
e.g. for long mixes
• right position: sharp crossfading (abrupt transition)
e.g. for scratching and cutting.

Note
• Do not use this control while a signal is present as this may
cause a sudden change in volume.
36
Control MIC LEVEL
Level control for DJ microphones connected to the jacks
[MIC 1] and [2].
37 Microphone inputs MIC 1 and 2
Input jacks for connecting DJ microphones via XLR or a
6.3 mm plugs.
46/72 00061967.DOC, Version 1.1