Omnitronic TMC-2 MK2 Bedienungsanleitung Seite 43

1 Button ► [PLAY]
To start playback and for stutter effects.
2
Button II [PAUSE]
To switch to pause and to jump to cue points.
3 Button CUE
• For return to the beginning of the title or a cue point
defined before (the unit is in pause mode).
• When keeping the button pressed in pause mode, the
title is momentarily played. As soon as you release the
button the unit instantly returns to the cue point.
4 Button BPM
Sets the number of beats per minute (BPM) of a title
manually. For this press the button several times to the
beat of the music.
5
Buttons PITCH BEND + and –
The function Pitch Bend creates a temporary change of
speed. As long as the buttons are pressed, the title is
played slower or faster.
6 Buttons HOT CUE 1-3
To store and to call up to three cue points per title.
7 Pitch slide control
Sets the speed (if the button [MASTER TEMPO] lights
up, the tonal pitch will not be changed). Slide the control
up to decrease the pitch, slide it down to increase it.
The pitch percentage is indicated in the display.
8
Button MASTER TEMPO
For constant pitch when the speed has been changed
with the [pitch slide control].
9 Button PITCH
For selecting the pitch adjustment range. Each push of
the button switches between ±100 %, ±6 %, ±12 % and
±25 %
10 Control MASTER CONTROL [Deck B]
Adjusts the overall volume.
11
Control BOOTH VOLUME [Deck A]
Level control for the output [BOOTH].
43/72 00061967.DOC, Version 1.1