Omnitronic TMC-2 MK2 Bedienungsanleitung Seite 55

4
For connecting amplifiers, several stereo outputs with individual level controls are available:
• Connect the main amplifiers to the unbalanced RCA output [MASTER] and/or to the balanced XLR
output [BAL OUT L/R].
• If a monitoring system is available, connect the amplifier of the monitoring system to the RCA output
[BOOTH].
5
For analog sound recordings, connect a recording unit to the recording output [REC]. The recording
level is independent of the position of the output controls [MASTER CONTROL], [MASTER LEVEL]
and [BOOTH VOLUME].
6
Instead of the audio signal coming from the computer, the master outputs and the booth output can also
supply the signal of an external signal source with line level output (e.g. CD player). Use the stereo
RCA jacks [LINE INPUT] for connecting the unit.
7
By operating the controller with a computer and units grounded via the mains cable (e.g. amplifier),
noise interference may occur due to ground loops. To eliminate this interference, a ground isolator (e.g.
from the OMNITRONIC LH series) may be used to connect the controller to the corresponding unit.
55/72 00061967.DOC, Version 1.1