Exploded View; Correct Use - Kampmann KaCool W Montageanleitung

EN Assembly instructions
1 Overview
1
2
3

Exploded view

2 Safety
This section provides an overview of all important safety aspects for protecting personnel. In ad-
dition to the safety notes in this and the more detailed instruction in accordance with the QR
Code, the occupational health and safety and environmental protection regulations applicable to
the unit's field of application, as well as the notes in accordance with EN60335-1, must be ob-
served.
2.1

Correct use

The units are only intended to be used for heating and cooling air in frost-free and dry rooms.
Within the room, the unit needs to be connected to the building's heating/cooling/ventilation
system and to the building's waste water and power network. The operating limits and limits of
use described in Chapter 2.2 [} 4] must be observed.
IMPORTANT NOTE!
Only use the unique after completion of the complete building and system. Site
heating is not deemed to be correct and proper use.
Intended use of the unit also includes adherence to these instructions.
Any use beyond or other than the stated intended use is considered as misuse.
Any change to the unit or use of non-original spare parts will cause the expiry of the warranty
and the manufacturer's liability.
SAP 1537632 01/22
4
1
5
2
3
4
5
2.2 Limits of operation and use
Limits of operation
Min./max. water temperature °C
Min./max. air intake temper-
°C
ature
Min./max. air humidity %
Min. operating pressure bar/kPa
Max. operating pressure bar/kPa
Min./max. glycol percentage %
Operating voltage
Power/Current consumption
IMPORTANT NOTE!
Danger of frost in cooling mode!
There is a risk of the heat exchanger freezing when used in unheated rooms.
Protect the unit from frost.
KaCool W
Assembly instructions
Kampmann GmbH & Co. KG
Friedrich-Ebert-Str. 128-130
49811 Lingen (Ems)
T: +49591/7108 0
E: info@kampmann.de
www.kampmann.de
Casing hood
Condensate tray
Air outlet fin
Electrical connection
ISO Coarse filter
6-75
15-30
max. 58%
-
8
25-50
230 V/ 50/60 Hz
On the type plate
4